Komatsu PC 228 USLC-3

  Daily Weekly Monthly
Reg
$725
$2,900
$9,300
Corp
$600
$2,500
$8,500
+ Delivery Rate & Operator Rate
We honor the lowest rate on all long term rentals.

Komatsu's PC 228 USLC Hydraulic Excavator Rental

First Look: Make - Komatsu, Model - PC 228 USLC. Reach of 31.7 ' and max dig depth of 21.8 '. You can also rent our Komatsu PC 200 LC - 8 excavator that is a similar size and with a conventional tail swing.

Short Tailswing Profile: Tailswing Radius: 1680 mm (5'6")

Power: 110 kW (148 HP) net. Engine is EPA Certified.

Dig Depth & Reach: Dig depth of 21.8 feet and a reach of 31.7 feet

Dimensions: 9 ft 2 inches wide, 28 ft 7 inches in length.

Operating Weight: With standard equipment  the PC 228 USLC rental weighs 24,675 kg (54,405 lb). Weight varies depending on attachments. 

Visibility: 9 ft 9 inches wide, and 7 ft 6 inches with improved visibility.

Excavator Rental for Demolition: When renting a Komatsu PC 228 USLC, we give you the option to equip it with a hydraulic thumb and full cab guarding for demolition purposes.

You can use a Komatsu PC 228 USLC Excavator Rental for:

  • Breaking down concrete with an attachment
  • Excavating pipes and circuitry
  • Loading gravel, sand, etc
  • Trench digging and backfilling
  • Demolition and debris removal
  • Foundatiion digging

Wescan rentals delivers and maintains heavy equipment, earthmovers, excavators, skid steers, track loaders and attachments. We service the Lower Mainland of Greater Vancouver, Fraser Valley and Vancouver Island: Vancouver, Burnaby, Poco, Port Coquitlam, Port Moody, Surrey, White Rock, Langley, New Westminster, Delta, Coquitlam, Ladner, Tsawwassen, Richmond, North Vancouver, West Vancouver, Pitt Meadows, Maple Ridge, Mission, Abbotsford,Chilliwack, Whistler, Victoria, Nanaimo. Contact us for more details on our rental packages.

Engine

Model   Komatsu SAA6D107E-1*
Type   Water-cooled, 4-cycle, direct injection
Aspiration   Turbocharged and air-to-air aftercooled
Number of cylinders   6
Bore 4.21" 107 mm
Stroke 4.88" 124 mm
Piston displacement 408 in³ 6.69 ltr
Power rating    
Gross (SAEJ1995) 155 HP @ 2000 rpm 116 kW @ 2000 rpm
Net (ISO 9249/SAEJ1349) 148 HP @ 2000 rpm 110 kW @ 2000 rpm
Fan drive type   Mechanical
Governor   All-speed control, electronic
*EPA Tier 3 and EU Stage 3A emissions certified.    

Hydraulics

Type   HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes   5
Main pump   Variable-capacity piston pump.
Pumps for   Boom, arm, bucket, swing, and travel circuits.
Maximum flow 116 u.s. gal/min 439 ltr/min
Supply for control circuit   Self-reducing valve
Hydraulic motors:    
Travel   2 x axial piston motor with parking brake
Swing   1 x axial piston motor with swing holding brake
Relief valve setting:    
Implement circuits 5,400 psi 37.3 MPa 380 kgf/cm²
Travel circuits 5,400 psi 37.3 MPa 380 kgf/cm²
Swing circuits 4,120 psi 28.4 MPa 290 kgf/cm²
Pilot circuit 470 psi 3.2 MPa 33 kgf/cm²
Hydraulic cylinders:    
(Number of cylinders – bore x stroke x rod diameter)    
Boom / 2 4.7" x 54.5" x 3.3" 120 mm x 1385 mm x 85 mm
Arm / 1 5.3" x 58.7" x 3.7" 135 mm x 1490 mm x 95 mm
Bucket / 1 4.5" x 44.1" x 3.2" 115 mm x 1120 mm x 80 mm

Swing System

Drive method   Hydrostatic
Swing reduction   Planetary gear type, double reduction
Swing circle lubrication   Grease-bathed
Swing lock   Mechanical disc brake
Swing speed   11.0 rpm
Swing torque 48,124 ft lbs 6656 kg.m

Drive & Brakes

Steering control   Two-lever with pedals
Drive method   Hydrostatic
Maximum drawbar pull 45,410 lb 202 kN 20600 kgf
Travel motor   Axial piston motor, in-shoe design
Reduction system   Planetary gear type, double reduction
Gradeability   70%, 35°
Maximum travel speed (Auto-Shift):    
High 3.4 mph 5.5 km/h
Mid 2.5 mph 4.1 km/h
Low 1.9 mph 3.0 km/h
Service brake   Hydraulic lock
Parking brake   Mechanical disc brake

Undercarriage

Center frame   X-frame
Track frame   Box-section
Seal of track   Sealed track
Track adjuster   Hydraulic
Number of shoes (each side):   49
Number of carrier rollers (each side):   2
Number of track rollers (each side):   9

Service Refill Capacities

Fuel tank 84.5 U.S. gal 320 ltr
Coolant 5.5 U.S. gal 21.0 ltr
Engine 6.1 U.S. gal 23.1 ltr
Final drive, each side 1.4 U.S. gal 5.2 ltr
Swing drive 1.9 U.S. gal 7.1 ltr
Hydraulic tank 33.3 u.s. gal 126 ltr 33.3 u.s. gal

Operating Weight (approx)

Operating weight, including 5700 mm / 18'8" one-piece boom, 2925 mm / 9'7" arm, SAE heaped 0.80 m³ / 1.05 yd³ backhoe bucket, operator, lubricant, coolant, full fuel tank, and the standard equipment.

Shoes Operating Weight Ground Pressure
600 mm
24"
24130 kg
53,195 lb
0.51 kg/cm²
7.28 psi
700 mm
28"
24395 kg
53,785 lb
0.44 kg/cm²
6.21 psi
800 mm
31.5"
24675 kg
54,405 lb
0.39 kg/cm²
5.62 psi